Conveyor Pulleys, Idlers and Lagging

PPI Idlers

  • CEMA A, B, C, D
  • 4” to 7” Roll Diameters
  • Belt Widths from 18” to 72”
  • Standard Troughing and Returns
  • Impacts, Self-aligning, Transition, Rubber Disc Returns; plus much more

The B Series idler that sets a standard for the industry:

  • Designed and manufactured for a long trouble free life with no greasing
  • Maintenance free high quality sealed ball bearings
  • Conform to CEMA standards for dimensions and meet or exceed B series load ratings
CEMA B LOAD RATINGS
BELT
WIDTH		 TROUGHING ANGLE RETURN
& FLAT		 UNEQUAL
20° 35° 45° 20° 35°
18 410 410 410 220    
24 410 410 410 190 360 410
30 410 410 410 165 240 390
36 410 410 369 155 200 240
42 390 363 351 140 170 240
48 390 353 342 125 160 200




  1. Deep formed channel end brackets to handle the loads
  2. Heavy Duty long foot pads for two bolt mounting to alleviate frame rocking
  3. Single center bolt mounting option
  4. Minimal roll gaps

 
  1. Extremely low T.I.R. or runout
  2. Roll end welds protected from belt wear
  3. Full thickness tubing for the entire length of the roll
  4. Large diameter stationary outer seal
  1. Highly effective flinger (centrifugal) seal
  2. Effective radial and labyrinth seals
  3. High Quality Ball Bearing with manufacturer’s contact seal & grease
  4. Solid steel shaft

C Series Idler Features

C series idlers designed and built for the toughest jobs

  • Designed and manufactured for a long trouble free life with no greasing
  • Maintenance free high quality sealed ball bearings.
  • Conforms to CEMA standards for dimensions and meet or exceed C series load ratings
CEMA C LOAD RATINGS
BELT
WIDTH		 TROUGHING ANGLE RETURN
& FLAT		 UNEQUAL (Picking) LIVE
SHAFT
20° 35° 45°
18 900 900 900 475   1,200
24 900 900 900 325 475 1,200
30 900 900 900 250 475 1,200
36 900 837 810 200 325 1,200
42 850 791 765 150 250 1,200
48 800 744 720 125 200 1,100
54 750 698 675 CEMA D 150 1,000
60 700 650 630 CEMA D 125 875
Two roll V-Returns (All) 500    
 



  1. Wide heavy duty formed end brackets
  2. Heavy Duty foot pads for a solid base
  3. Wide center brackets for heavy loads
  4. Designed with minimal roll gaps
  1. Roll weld protected from belt wear by
    the full thickness of the tubing
  2. Full thickness tubing for the length of
    the roll with a 1/4” wall option
  3. Extremely low T.I.R. or runout
  4. Large diameter stationary outer seal
  1. Highly effective flinger seal
  2. Effective radial and labyrinth seals
  3. Long lasting nitrile contact seal
    protected from the environment
  4. High Quality Ball Bearing with
    manufacturer’s contact seal & grease

D Series

Idler Features

D series idlers designed and built for the toughest jobs

  • Designed and manufactured for a long trouble free life with no greasing
  • Maintenance free high quality sealed ball bearings.
  • Conforms to CEMA standards for dimensions and meet or exceed C series load ratings
CEMA D LOAD RATINGS
BELT
WIDTH		 TROUGHING ANGLE RETURN
& FLAT		 UNEQUAL (Picking)
20° 35° 45°
18 1200 1200 1200 600  
24 1200 1200 1200 600 600
30 1200 1200 1200 600 600
36 1200 1200 1200 600 600
42 1200 1200 1200 500 600
48 1200 1200 1200 425 530
54 1200 1116 1080 375 440
60 1150 1070 1035 280 440
72 1050 977 945 155 280
Two roll V-Returns (All) 850  




  1. Wide heavy duty formed end brackets
  2. Heavy Duty foot pads for a solid base
  3. Wide center brackets for heavy loads
  4. Designed with minimal roll gaps
  1. Roll weld protected from belt wear by the full thickness of the tubing
  2. Full thickness tubing for the length of the roll with a 1/4” wall option
  3. Extremely low T.I.R. or runout
  4. Large diameter stationary outer seal
  1. Highly effective flinger seal
  2. Effective radial and labyrinth seals
  3. Long lasting nitrile contact seal protected from the environment
  4. Solid shaft and heavy duty, high quality ball bearings with the manufacturer’s contact seals

 

 

E Series Idler Features
CEMA E LOAD RATINGS
BELT
WIDTH		 TROUGHING ANGLE RETURN
& FLAT		 UNEQUAL (Picking)
20° 35° 45°
36 1800 1800 1800 1000 1260
42 1800 1800 1800 1000 1200
48 1800 1800 1800 1000 1000
54 1800 1800 1800 925 1000
60 1800 1800 1800 850 1000
66 1800 1800 1800 775 1000
72 1800 1800 1800 700 925
78       625  
84 1800 1674 1620 550 775
90       475  
96 1750 1628 1575 400 625
102       250  
Two roll V-Returns (All) 1300  

E-Series idlerdesigned and built to handle huge loads!

  • Designed and manufactured for a long trouble free life with no greasing
  • Maintenance free high quality sealed ball bearings.
  • Super duty frames built to last the life of the conveyor
  • Conforms to CEMA standards for dimensions and meet or exceed C series load ratings
 


  1. Extra heavy-duty formed end brackets
  2. Extra heavy-duty formed center brackets
  3. Designed with minimal roll gaps
  4. Extremely low T.I.R. or runout

 

 
  1. Full thickness tubing for the length of the roll
  2. Weld protected from wear by the full thickness of the tubing
  3. Large diameter stationary seal
  4. Highly effective flinger seal
  1. Nitrile contact seal protected from the environment
  2. Solid steel shaft reduces deflection and increases load capacity
  3. Bearing manufacturers contact seal & grease
  4. Large diameter, high quality ball bearings to handle the big loads with no regular maintenance

8100 E Broadway Ave, suite A, Tampa, Fl 33619
Office: 813.247.3620 | Fax: 813.248.5716 | management@bmgtampa.com